-  
 
 
 
 23.29 EUR[inkl. 20% MwSt]
10.49 EUR[inkl. 20% MwSt]
10.49 EUR[inkl. 20% MwSt]
13.99 EUR[inkl. 20% MwSt]
13.79 EUR[inkl. 20% MwSt]
7.19 EUR[inkl. 20% MwSt]
12.59 EUR[inkl. 20% MwSt]
10.19 EUR[inkl. 20% MwSt]
4.49 EUR[inkl. 20% MwSt]
DB/DF/DT Reifeneinlagen hinten 62/35 (2) 
	 Art.Nr.: 300084201 
	Artikelbezeichnung: DB/DF/DT Reifeneinlagen  hinten 62/35 (2) 
	 
	These are the inner sponges,  which are included in Tamiya 1/10 scale buggy tire  sets such as Item 54186 D ...  mehr >>>Tamiya 6.79 EUR[inkl. 20% MwSt]
Alu Schrauben (4) f. Servomontage  Art.Nr.: 300054862  
 Art.bezeichnung: Alu Schrauben (4)  f. Servomontage  
 
 Get the best out of your servo with  these step screws, which give tighter and more secure attachment.   
 
 Item Con ...  mehr >>>Tamiya 10.49 EUR[inkl. 20% MwSt]
DT-03/02 19Z Stahl Motorritzel M0,8 
	 Art.Nr.: 300054629 
	Artikelbezeichnung: DT-03/02 19 Z  Stahl Motorritzel M0,8 
	 
	These steel parts have greater  durability compared to kit standard aluminum pinion  gears, letting you run you ...  mehr >>>Tamiya 5.69 EUR[inkl. 20% MwSt]
DT-03/02 17Z Stahl Motorritzel M0,8 
	 Art.Nr.: 30004628 
	Artikelbezeichnung: DT-03/02 17 Z  Stahl Motorritzel M0,8 
	 
	These steel parts have greater  durability compared to kit standard aluminum pinion  gears, letting you run your ...  mehr >>>Tamiya 5.69 EUR[inkl. 20% MwSt]
Kugellager-Satz 1150 (16) 
	 Art.Nr.: 300054579 
	Artikelbezeichnung: Kugellager 1150  (16) 
	 
	When tuning up your R/C car, ball bearings  are a great first step, reducing power loss in the  drivetrain and increasing the l ...  mehr >>>Tamiya 29.99 EUR[inkl. 20% MwSt]
TRF Alu Distanzscheiben 0,75 mm blau (8) 
	 Art.Nr.: 300054573 
	Artikelbezeichnung: TRF Alu Distanzscheiben  0,75 mm blau (8) 
	 
	These spacers are designed  to gain even greater precision in your touring car  model tread setup (the widt ...  mehr >>>Tamiya 7.99 EUR[inkl. 20% MwSt]
34.00 EUR[inkl. 20% MwSt]
DT-03 Getriebewellen leicht (2) 5x45mm Art.Nr.: 300054560 
Artikelbezeichnung: DT-03 Getriebewellen  leicht (2) 5x45mm 
 
These gear shafts are  for use with the new DT-03 buggy chassis. They are lightweight  compared to the standard kit  ...  mehr >>>Tamiya 3.49 EUR[inkl. 20% MwSt]
Chassis Schutzfolie hart 0,3mm (2) 
	 Art.Nr.: 300054499 
	Artikelbezeichnung: Chassis Schutzfolie  hart 0,3mm (2) 
	 
	This is a protective film  designed to be used under the main chassis of your favorite  R/C vehicle. It's hig ...  mehr >>>Tamiya 15.79 EUR[inkl. 20% MwSt]
DT-02 Alu. Servohalterung 
	 Art.Nr.: 300054397 
	Artikelbezeichnung: DT-02 Alu. Servohalterung  
	 
	These screw shafts are used in place of  3x22mm screw pins for stronger damper attachment. The shaft  also features a low- ...  mehr >>>Tamiya 17.99 EUR[inkl. 20% MwSt]
TT-01/DT-02 3x22 Low Fric.Querl.welle(4) 
	 Art.Nr.: 300054395 
	Artikelbezeichnung: TT-01/DT-02 3x22  Low Fric.Querl.welle(4) 
	 
	These shafts are used in  place of 3x22mm screw pins and ensure secure attachment thanks  to E-rings. The s ...  mehr >>>Tamiya 8.20 EUR[inkl. 20% MwSt]
Elektromotor RS-540 Torque-Turned 
	 Art.Nr.: 300054358 
	Art.bezeichnung: Elektromotor RS-540  Torque-Turned 
	 
	Tamiya has developed this new Torque-Tuned  motor, which offers performance that is between  that of a standard Type  ...  mehr >>>Tamiya 13.00 EUR[inkl. 20% MwSt]
Reifen (2) Dual-Block hinten 62/35 
	 Art.Nr.: 300054186 
	Art.bezeichnung: Reifen (2) Dual-Block  hinten 62/35 
	 
	These tires feature new tread  pattern and are designed for superb control on high-traction  on-road and off-road tr ...  mehr >>>Tamiya 21.29 EUR[inkl. 20% MwSt]
Elektromotor Dirt-Tuned 27T 
	 Art.Nr.: 300053929 
	Artikelbezeichnung: Electric Motor  Dirt-Tuned 27T 
	 
	Technische Details: 
	 
	Spannungsbereich:  7,2V 
	Umdrehungen bei Belastung: 17000  U/min (7,2V) 
	Drehmoment: 37 ...  mehr >>>Tamiya 58.99 EUR[inkl. 20% MwSt]
DF-03 Felgen (2) Dish hinten 62/35 
	 Art.Nr.: 300053881 
	Artikelbezeichnung: DF-03 Buggy-Felgen  Dish weis.hi.(2)62/35 
	 
	Newly designed off-road  wheels for tires featuring larger diameter and width,  and new micro pin tread pat ...  mehr >>>Tamiya 12.29 EUR[inkl. 20% MwSt]
DT-02 Kugeldifferential 
	 Art.Nr.: 300053863 
	Artikelbezeichnung: Kugeldifferential  DT-02  
 
	 Ball diff set provides limited  slip effect, improving mobility and traction while enabling  stable high speed cornering. D ...  mehr >>>Tamiya 52.00 EUR[inkl. 20% MwSt]
DT-02 Tuningfedern Set (2x4) 
	 Art.Nr.: 300053832 
	Artikelbezeichnung: DT-02 Tuningfedern  Set (2x4) 
	 
	Set of 8 front and rear springs  to be used with CVA damper to allow suspension adjustments  to suit road conditions. S ...  mehr >>>Tamiya 26.99 EUR[inkl. 20% MwSt]
DT-02 Alu Motorkühlkörper 
	 Art.Nr.: 300053831 
	Artikelbezeichnung: DT-02 Alu Motorkühlkörper  
	 
	Special motor heat sink has  more and longer fins than ordinary heat sinks increasing  effectiveness. Motor clin ...  mehr >>>Tamiya 36.29 EUR[inkl. 20% MwSt]
DT-02 Sturz- und Spurstangen Set einst. 
	 Art.Nr.: 300053828 
	Art.bezeichnung: DT-02 Sturz- und  Spurstangen Set einst. 
	 
	★These turnbuckle shafts are  for use in place of DT-02 upper arms and steering tie-rods.  ★Use them to fine-tu ...  mehr >>>Tamiya 29.99 EUR[inkl. 20% MwSt]
DF-02 Kugel-Kardanwellen (2)Art.Nr.: 300053791 
Artikelbezeichnung: DF-02 Kugel-Kardanwellen  (2) 
 
Verschleißärmer und leichtläufiger  als die Standard Antriebswellen. Dadurch  wird die Lenkpräzision erh&o ...  mehr >>>Tamiya 56.99 EUR[inkl. 20% MwSt]
Rad-Distanzscheibe (8) BLAUArt.Nr.: 300053646 
Art.bezeichnung: Rad-Distanzscheibe (8)  BLAU 
 
★Handy spacers for use in adjusting tread, etc.  ★Includes four each of 0.5mm and 1mm spacers. 
   mehr >>>Tamiya 13.00 EUR[inkl. 20% MwSt]
Kugelkopf Alu 5mm (BLAU)Art.Nr.: 300053642 
Art.bezeichnung: Kugelkopf Alu 5mm (BLAU)  
 
★Lightweight and durable aluminum ball connectors  provide smooth motion and a cool look with their  blue anodized finish. ★Replace wo ...  mehr >>>Tamiya 13.49 EUR[inkl. 20% MwSt]
Kugelmuttern (10) 5mm Alu blauArt.Nr.: 300053640 
Art.bezeichnung: Kugelmuttern (10) 5mm  Alu blau 
 
★Replace ball connector nuts before as they  become worn, to ensure your model is running at peak performance.  ★Parts are given ...  mehr >>>Tamiya 14.29 EUR[inkl. 20% MwSt]
Einstellstück (8) Low Friction 5mmArt.Nr.: 300053601 
Artikelbezeichnung: Einstellstück  (8) Low Friction 5mm 
 
These 5mm ball  connectors are made of a low friction plastic material  which ensures smooth linkage rod movement. T ...  mehr >>>Tamiya 6.79 EUR[inkl. 20% MwSt]
ALU Kugelmuttern (10) FLUOR.  Art.Nr.: 300053599  
 Art.bezeichnung: ALU Kugelmuttern (10)  FLUOR.  
 
 ★These aluminum ball connector nuts have  a low-friction coating applied for smooth, efficient motion.  ★They are also light ...  mehr >>>Tamiya 16.79 EUR[inkl. 20% MwSt]
Radmitnehmer (4) Alu 6mm silber Art.Nr.: 300053569 
Art.bezeichnung: Radmitnehmer (4) Alu  6mm silber 
 
These machined aluminum hubs clamp to the  wheel axle rather than the slip-on stock plastic units resulting  in truer spinning ...  mehr >>>Tamiya 36.29 EUR[inkl. 20% MwSt]
TT-02B/DT/DF Reifen (2) hin. Baukasten  Art.Nr.: 300053084  
 Art.bezeichnung: TT-02B/DT/DF Reifen  (2) hin. Baukasten  
 
 Compatible Chassis  
 DF-02,  TT-02B, DT-02 & DT-03 Chassis  
 Compatible wheels:  Item 51206, Item 51262 an ...  mehr >>>Tamiya 20.50 EUR[inkl. 20% MwSt]
Elektromotor 540 Sport Tuned 
	 Art.Nr.: 300053068 
	Art.bezeichnung: Elektromotor 540  Sport Tuned 
	 
	Dieser economische Hochleistungs-Motor  ist vielseitig einsetzbar. Somit ist er  gleichermaßen für den Einsatz  ...  mehr >>>Tamiya 37.99 EUR[inkl. 20% MwSt]
18.79 EUR[inkl. 20% MwSt]
10.60 EUR[inkl. 20% MwSt]
11.39 EUR[inkl. 20% MwSt]
36.29 EUR[inkl. 20% MwSt]
3x6mm 6-Kantkopf Schraube Stahl (10) 
	 Art.Nr.: 300051624 
	Art.bezeichnung: 3x6mm 6-Kantkopf  Schraube Stahl (10) 
	 
	★These are durable steel  screws with hex heads for secure tightening. 
	★Replace  parts in a timely fashion to e ...  mehr >>>Tamiya 2.80 EUR[inkl. 20% MwSt]
Kar.-Satz Sand-Viper DT02/DN01 
	 Art.Nr.: 300051518 
	Artikelbezeichnung: Kar.-Satz Sand-Viper  DT02/DN01 
	 
	This is the spare body parts set  of the Sand-Viper. The body may be mounted on the Tamiya  DT-02 chassis platform as ...  mehr >>>Tamiya 22.99 EUR[inkl. 20% MwSt]
6.70 EUR[inkl. 20% MwSt]
16.30 EUR[inkl. 20% MwSt]
12.29 EUR[inkl. 20% MwSt]
17.99 EUR[inkl. 20% MwSt]
7.69 EUR[inkl. 20% MwSt]
12.79 EUR[inkl. 20% MwSt]
5.99 EUR[inkl. 20% MwSt]
4.69 EUR[inkl. 20% MwSt]
7.69 EUR[inkl. 20% MwSt]
3.40 EUR[inkl. 20% MwSt]
39.49 EUR[inkl. 20% MwSt]
36.29 EUR[inkl. 20% MwSt]
17.29 EUR[inkl. 20% MwSt]